Reg. Redundant interfaces in ASA 8.0

ankurs2008 · ‎08-04-2009

Hi

In ASA 8.0,I have following queries related to redundant interfaces

a)While configuring redundant interface can the redundant interface again be divided into logical interface like red1.1 , red1.2 ?

b)Is Redundant interface supported in the Multiple context mode

Regards

Ankur

suschoud · ‎08-04-2009

Yes Ankur,it is possible.

##snippet##

interface Ethernet0/0

shutdown

no nameif

no security-level

no ip address

!

interface Ethernet0/1

speed 100

nameif inside

security-level 100

ip address 192.168.16.19 255.255.255.128

ospf network point-to-point non-broadcast

ospf message-digest-key 123 md5

!

interface Ethernet0/2

shutdown

no nameif

no security-level

no ip address

!

interface Ethernet0/3

nameif null0

security-level 50

ip address 10.2.1.1 255.255.255.0

!

interface Management0/0

no nameif

security-level 0

no ip address

!

interface Redundant1

member-interface Ethernet0/0

member-interface Ethernet0/2

no nameif

no security-level

no ip address

!

interface Redundant1.1

vlan 32

no nameif

no security-level

ip address 1.1.1.8 255.0.0.0

Regards,

Sushil

ankurs2008 · ‎08-06-2009

Hi

thanx for the example .Hi can we configure red. interfaces in PIX and FWSM or only in ASA 5500 Series .

Also i wanted to know if the Redundant interface supported in the Multiple context mode

Ankur

ankurs2008 · ‎08-07-2009

Hi

Please guide me for my above query

Ankur

Kantha Wijesekara · ‎06-12-2012

HI

Can anyone tell wheather I can use Interface redundancy concept for 1 nos of ASA to connect 2 nos of core switches(Act/Stanby). I have configured but only one interface of the ASA always active. What can be the issue.

Kantha