Cisco Calling Card Application; Card Number Authentication Issue

Unanswered Question
Aug 4th, 2009
User Badges:


I am using AS5350 for my calling card application using Clear Box as my RADIUS Server for AAA. My question now, how would I know if cisco is sending the dtmf for "enter card" on the RADIUS server ? I issue a debug aaa authentication, but I didn't see any debug information. I only see it using debug voip ivr state. Does the card number included on the VSA ? below are my configurations.

aaa authentication login default local

aaa authentication login h323 group radius

aaa authorization exec h323 group radius

aaa accounting connection h323 start-stop group radius


radius-server host auth-port 1812 acct-port 1813 key 7 104D000A0618565A1F102F3B7379

radius-server vsa send accounting

radius-server vsa send authentication


call application voice prepaid tftp://

call application voice prepaid pin-len 10

call application voice prepaid warning-time 300

call application voice prepaid language 0 en

call application voice prepaid set-location en 0 tftp://


dial-peer voice 100 pots

application prepaid

destination-pattern .T

port 1/0/0

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion