Hello Al,
Is this for Cisco 7921/7925 phones?
If you are going to be using Open Authentication or WPA-PSK Authentication then by default you will have fast roaming.
If you are going to be using WPA-802.1X Authentication then you have to make sure few things are in place:
1. CCKM is enabled on AP and your client must support CCKM as well.
2. APs are configured for WDS. One AP will play a role of a WDS server talking to the RADIUS server, and another AP will be WDS client talking to the WDS server.
3. If using 7921 phones, you need to have WPA+TKIP (AES is not supported for fast secure roaming).
Regards,
Roman