ERASE START UP CONFIG XR

Unanswered Question
Leo Laohoo Wed, 08/05/2009 - 21:38
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

In enable mode: wr er

Rick Morris Mon, 08/10/2009 - 07:40
User Badges:
  • Silver, 250 points or more

When you are in enable mode, or exec depending on what you call it, if you type erase what are your options?


I believe your option would be erase startup-config



xthuijs Tue, 04/05/2011 - 12:18
User Badges:
  • Cisco Employee,

go into configuration mode in ios-xr

make a small change such as "no hostname"

do

commit replace

that will wipe out the entire config.

Akhileshpk_2 Wed, 04/06/2011 - 05:06
User Badges:

Hi,


What is your hardware platform?


Please try the following commands after removing the standby RP:


          commit replace

          commit replace best-effort


Do not forget to create a user before reloading the router as given below:


RP/0/RSP0/CPU0:ios(config)#username abc
RP/0/RSP0/CPU0:ios(config-un)#secret abc123
RP/0/RSP0/CPU0:ios(config-un)#group root-system 
RP/0/RSP0/CPU0:ios(config-un)#commit 


Please revert .... !!!


Regards,

Akhil

Actions

This Discussion