cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
238
Views
0
Helpful
2
Replies

EIGRP/stub and Query

mlopacinski
Level 1
Level 1

Hello

There is LAN segment with R1,R2,R3 running EIGRP. R3 is configured as stub. R1 and R2 are connected to other LAN segment. R1's connection to that segment is goin down. R1 send update that it has no longer that prefix. R3 receives it and let's assume that it has not feasible successor for that route. Will R3 query both R1 and R2 ? Does stub functionality changes this behavior or not ?

Thanx

2 Replies 2

Laurent Aubert
Cisco Employee
Cisco Employee

Hi

If stub feature is enabled on R3, R1 and R2 will not send the QUERY to R1.

http://www.cisco.com/en/US/technologies/tk648/tk365/technologies_white_paper0900aecd8023df6f.html

HTH

Laurent.

vishwancc
Level 3
Level 3

Hi ,

If you look at how eigrp negihbour relationship forms there is a stub field.

When the router become the neighbor the router configured with stub command set that field and send it to the neighbour,so the neighbour knows in advance the the connected neighbour is stub and do not send query message to it.

Chao

Vishwa

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: