cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
943
Views
0
Helpful
4
Replies

failure to transmit live audio with Syn-Apps Announce

beauyates
Level 1
Level 1

Hello,

Our organization uses Syn-Apps Announce 7.0.58 with Call Manager 6.1.2.1000-13. With SA Announce we are unable to make a live audio broadcast. Our attempts result in all the phones in a particular group being activated and the incoming announcement tone sounding. However the speech is not transmitted to the phones. Has any SA Announce user encountered this difficulty?

Thank you for any help,

Beau

4 Replies 4

Jonathan Schulenberg
Hall of Fame
Hall of Fame

I have seen similar behavior where a subset of users stopped receiving Wokkie Tokkie-type pages. In that case it was because IGMP was not behaving properly on a switch and failed to add ports to the stream. I would recommend running some multicast tests to start from SA-Announce, Also try turning multicast off temporarily and see if the problem persists on a unicast page.

Thank you for your kind help.

The unicast page does work.

The multicast tests (server to phone and phone to phone) do work.

The multicast page does not work.

What would be my next step?

Thanks,

Beau

benbollinger
Level 2
Level 2

Did you get this resolved?  We're having the same problem.

Any more info on this? We're also having this same problem.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: