Need Help with FWSM on 6500 and removing a vlan from FWSM

Unanswered Question
Aug 7th, 2009

I created a vlan 102 on the 6500 and then added it to vlangroup 1 and set it up to the FWSM with "firewall module 7 vlan-group 1". I then created the SVI on the FWSM with the IP and Stanby IP as I have a active and standby blade in 2 different chassis.

Now I need to delete the VLan 102 from the FWSM and the vlan group 1.

I was able to delete the interface but cannot delete the vlan 102 from the vlan group...

How is this done?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
sudheesh.pb Fri, 08/07/2009 - 23:09


To Delete the Vlan from Vlan Group 1, use the following commands in your 6500,

no firewall vlan-group 1 102

This will remove only vlan 102 from the list.

Try this and respond.




This Discussion