Conference calls in CME

Answered Question
Aug 8th, 2009
User Badges:

I have CME 7.1 and I need to implement conference calls up to 8 calls. So I added the following command:


max-conferences 8 gain -6


but I am not able to make conferences for more than 2 parties.


Shall I use conference bridge?


I have also the same problem with Music on hold, I used the command:


moh music-on-hold.au


but it does not work.



So any body can help me??

Correct Answer by Paolo Bevilacqua about 7 years 7 months ago

Note, moh is sent to external calls only. And, .AU files good for the router are difficult to produce, so just try the default file to begin with.


Please remember to rate useful posts with the scrollbox below.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Paolo Bevilacqua Sat, 08/08/2009 - 03:03
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

You need to follow the conferencing chapter in the administration guide, the configuration is explained there.

JustForVoice_2 Sat, 08/08/2009 - 04:51
User Badges:

thank you, but what about moh


I already have added the file (music-on-hold.au) to flash and under telephony service I added:

moh music-on-hold.au


but it does not work.

Correct Answer
Paolo Bevilacqua Sat, 08/08/2009 - 05:27
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Note, moh is sent to external calls only. And, .AU files good for the router are difficult to produce, so just try the default file to begin with.


Please remember to rate useful posts with the scrollbox below.



Actions

This Discussion