08-09-2009 07:36 AM - edited 03-21-2019 01:24 AM
Is there any way to pu the spa 9000 behind the 7975g phone. I have a sllm224 switch and a dlink router. Do I have to have call manager and if so what hardware should I swap. I just started a very small business but plan to grow only have 2 phones atm.
Solved! Go to Solution.
08-10-2009 05:40 AM
Hi,
The 7900 Series phones do not work with the SPA9000 IP PBX, unless they are in SIP mode. However, there are more affordable models of SPA phones. More information on:
http://www.cisco.com/en/US/products/ps10033/prod_models_home.html
Thanks,
Marcos Hernandez
Technical Marketing Engineer
Cisco Systems, Inc.
08-10-2009 08:13 AM
I have read up on the subject, and it appears that we don't support the 7975g in SIP mode without CUCME or CUCM. It is not supported with 3rd party SIP call control even when the 7975g phone is running a SIP load. Currently, the only phones supported in SIP mode with 3rd party call control are the 7940 and 7960 phones.
I am not saying that this won't work, but this might be a very difficult and undocumented process.
08-10-2009 05:40 AM
Hi,
The 7900 Series phones do not work with the SPA9000 IP PBX, unless they are in SIP mode. However, there are more affordable models of SPA phones. More information on:
http://www.cisco.com/en/US/products/ps10033/prod_models_home.html
Thanks,
Marcos Hernandez
Technical Marketing Engineer
Cisco Systems, Inc.
08-10-2009 07:37 AM
Thanks Marco. I already purchased the phones. How can set the phones as sip mode?
08-10-2009 08:10 AM
Here is all the related documentation:
http://www.cisco.com/en/US/products/sw/voicesw/ps2156/tsd_products_support_series_home.html
Please notice that the SIP load on the 7900 is something that we do not support in these forums. If you have issues, you may want to try TAC or Netpro.
Thanks,
Marcos
08-10-2009 08:13 AM
I have read up on the subject, and it appears that we don't support the 7975g in SIP mode without CUCME or CUCM. It is not supported with 3rd party SIP call control even when the 7975g phone is running a SIP load. Currently, the only phones supported in SIP mode with 3rd party call control are the 7940 and 7960 phones.
I am not saying that this won't work, but this might be a very difficult and undocumented process.
08-10-2009 08:37 AM
Ok thank you very much. My Next question is. Should I return the 7975 for 7960 phones or should I go for the CME router. Will my setup work if I where to get the cisco cme router with my slm224gs? In other words what would I need to make this work. Keep in mind that I have only 2 phones for now. I would like CME but would like to go with the cheapest route available for my small demand of 2 to 3 phones atm. What are my options guys? Thank you
08-10-2009 01:02 PM
The most affordable option is to get SPA942 and/or SPA962 phones and use them with your SAP9K.
Marcos
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide