QoS/Rate Limiting on the ASA

Unanswered Question
suschoud Tue, 08/11/2009 - 12:47

you need to use acl to define the traffic.

example :

Limiting the bandwidth to 1 mbps

----------------------------------

class-map QOS_IT

match access-list OUTSIDE_mpc_in_V1

class-map QOS_IT_IN

match access-list inside_mpc_in_V1

policy-map my_policy

class QOS_IT_IN

police output 1000000

policy-map my_policy_1

class QOS_IT

police input 1000000

service-policy my_policy interface inside

service-policy my_policy_1 interface outside

##########

Qos Over Vpn

----------------

access-list 101 extended permit tcp any any eq telnet

class-map tcp_traffic

match access-list 101

!

policy-map tcp_policy

class tcp_traffic

priority

!

service-policy tcp_policy interface outside

service-policy tcp_policy interface inside

!

priority-queue inside

priority-queue outside

when you create the priority queue on the inside and on the outside

interfaces, the packet will be put into the priority queue from the inside

interface, and transfered along to the outside interface queue with the same

priority (after encryption).

########

suschoud Tue, 08/11/2009 - 15:06

i just gave an example for other ppl in forum who MIGHT need vpn traffic to be policed.

just use the acl to define the traffic and u should be good.

Actions

This Discussion