When I create a unlimitied guest acct with in WCS I receive this error (see attached file). Has anybody ran into this issue?
Okay, now I see an error for MIB access failure : GuestUser!x.x.x.x!lassie : lifeTime : No access
This points to an SNMP problem.
Can you make sure you are using a RW community string in WCS for the WLC and NOT an RO community string?
Is there a FW between the WCS and the WLC?
Another thing to do, to make sure SNMP works, after you checked that you use the RW community string is to do an snmpwalk on the WLC from the WCS server with a freeware such as : net-snmp : http://net-snmp.sourceforge.net/
the command would be:
snmpwalk -v 2c -c RWCOMMUNITYNAME x.x.x.x
where x.x.x.x is the ip of the WLC and RW... the name of the community string
Also, if the issue persist, could you post here all the logs.zip file and not only the wcs-0-0? That will be helpful.