×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.
Seroj Hacopian Wed, 08/12/2009 - 17:27
User Badges:

Thanks for the link,


I have 100 lwap access points connected to the 3560 switches and new sip phones are going to be used on the wireless network, my question is do I need to just configure the switches that AP's are connected to with QOS or there are additional things I need to do. to complet the qos aspect of it.



Thanks



Jonathan Schulenberg Wed, 08/12/2009 - 17:37
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

This is addressed within the Voice over WLAN Design Guide. I would recommend reading this entire chapter so you fully understand the "art" that is wireless QoS.


Voice over Wireless LAN 4.1 Design Guide

WLAN Quality of Service

IEEE 802.11e, IEEE 802.1P, and DSCP Mapping

http://www.cisco.com/en/US/docs/solutions/Enterprise/Mobility/vowlan/41dg/vowlan_ch2.html#wp1046206

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode