Blocking calls on CME

Unanswered Question
Aug 12th, 2009
User Badges:

I have a call manager express with 44 extensions. Half of them have extensions that start with 66XX and the other half have 61XX.


Right now all extensions are able to receive incoming and make outgoing calls to the outside world (PSTN network). I just want to limit this feature to the extensions 66XX and block all extensions 61XX from making these calls (just internal calls allowed with the CME). How to do that, is there any idea?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
paolo bevilacqua Wed, 08/12/2009 - 05:14
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

In you case, a COR config seems to be the most applicable.


Note, you do not need to configure COR pervasively. Just make sure the COR class for the blocked extension doesn't have the COR key for external calls DP - that means COR class can be empty. You can omit any COR on all the rest

Rob Huffman Wed, 08/12/2009 - 05:17
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Walid,


Have you looked into this good feature;


Configuring Class of Restrictions (COR)


http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a008019d649.shtml


Hope this helps!

Rob



Edit: Paolo, you are way too fast for me this early in the AM! Not enough Java yet :) Cheers buddy!

valides007 Wed, 08/12/2009 - 05:38
User Badges:

Rob,


Here is my issue:


CME 1 <--> CME 2 <--> T1 Line


The extensions i mentioned earlier are sitting in CME 2. If i apply COR these extensions won't be able to make calls to CME 1 too, which creates another problem for me. I want those extensions to make calls to CME 1 and be blocked to go through the T1 line

paolo bevilacqua Wed, 08/12/2009 - 05:49
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

That is not correct, on CME2 you would apply COR on the DP for T1 only, calls to CME1 will be unaffected.

valides007 Wed, 08/12/2009 - 06:02
User Badges:

Here is my dial-peer and one of the ephone-dn, could you please post an example to show me how to block this extension. I've never used COR before and i'm kind of confused


dial-peer voice 11 pots

description 11 digits dialing

destination-pattern 91[2-9]..[2-9]......

port 0/0/0:23

forward-digits 11

.....


ephone-dn 30 dual-line

number 6134


paolo bevilacqua Wed, 08/12/2009 - 06:55
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

You would apply COR on ephone-dn-template likely.


Examples are in the link Rob posted above. If you're interested having the job done quick and well for a reasonable fee, contact me at the address present in my profile.

valides007 Wed, 08/12/2009 - 07:12
User Badges:

Tx... have it done, don't need your reasonable fee

paolo bevilacqua Wed, 08/12/2009 - 07:15
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

You're welcome.


Considering your attitude (I'm sure you have an higher reputation for your own professionalism and wages than the one you show for others), I'll be glad to avoid helping you in the future, so good luck.

valides007 Wed, 08/12/2009 - 07:50
User Badges:

You did help a lot when you offered your reasonable fee. If i need to pay for help smartnet would be the best option.


To my knowledge this forum is not meant for people like you to advertise their service. If you are not willing to help for free don't even try to jum into the conversation.

paolo bevilacqua Wed, 08/12/2009 - 08:03
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Your words actually prove my point, you have little consideration for other's work, rating a generic smartnet contract more than professional consultancy.


Then regarding what I should or should not do, fortunately judgment on that is not your.


Beside, others appreciation for my free and continued advice is shown by my overall rating, check it out.



valides007 Wed, 08/12/2009 - 08:21
User Badges:

I'm not judging you. Probably you have been very helpfull with your free and continued advice. This wasn't the case with my topic though (remember you offered a service with a reasonable fee).

If i offended you somehow, i'm very sorry and let's not go beyond that.

valides007 Wed, 08/12/2009 - 08:30
User Badges:

I'm not judging you. Probably you have been very helpfull with your free and continued advice. This wasn't the case with my topic though (remember you offered a service with a reasonable fee).

If i offended you somehow, i'm very sorry and let's not go beyond that.

Actions

This Discussion