I would like to confirm our topology with configuration.
this's goal is that CE with attached to UPE with Port-based must communication other side CE through H-VPLS Architecture.
Remark: VC ID is 100, H-VPLS vlan tag is 100, VC ID 100
VPLS Device's Loopback address:188.8.131.52/32
desc to vpls_UPE
ip address 184.108.40.206 255.255.255.0
desc from CE 2600
xconnect 220.127.116.11 100 encapsulation mpls
vfi name vpls100
neighbor 18.104.22.168 encapsulation mpls
neighbor 22.214.171.124 encapsulation mpls no-split-horizon
int vlan 100
xconnect vfi vpls100
The other site's configuration is same. I concern about How can communication VC type 5 to H-VPLS architecture?
thank in advance.