hi..
I would like to confirm our topology with configuration.
this's goal is that CE with attached to UPE with Port-based must communication other side CE through H-VPLS Architecture.
Remark: VC ID is 100, H-VPLS vlan tag is 100, VC ID 100
VPLS Device's Loopback address:1.1.1.1/32
CE(2600)
int fa0/0
desc to vpls_UPE
ip address 1.1.1.1 255.255.255.0
no sh
UPE(7600)
int gi0/1
desc from CE 2600
xconnect 1.1.1.1 100 encapsulation mpls
NPE(7600)
vfi name vpls100
vcid 100
neighbor 2.2.2.2 encapsulation mpls
neighbor 1.1.1.1 encapsulation mpls no-split-horizon
!
int vlan 100
xconnect vfi vpls100
!
The other site's configuration is same. I concern about How can communication VC type 5 to H-VPLS architecture?
any thought?
thank in advance.