SRST transfer question

Unanswered Question
Aug 13th, 2009

Below is an extract form our SRST config.

All DN`s are 719xxxx but in realliyu user only dial the last 4 digits

It seems that since I have translations under the fallback, I could not transfer call in SRST unless I entered the DN prefix of 7.... I thought all IP to IP transfer calls are allowed and you only have to hav eteh transfer-pattern commend for IP to non - IP calsl i.e PSTN, Telco- It seems to be due to the Translation rules- Is this normal.

voice translation-rule 1

rule 1 /^7\(...\)/ /7197\1/

voice translation-rule 2

rule 1 /^719\(....\)/ /\1/

voice translation-profile ADD719

translate called 1

voice translation-profile REMOVE719

translate calling 2

application

global

service alternate Default

ccm-manager fallback-mgcp

ccm-manager redundant-host x.x.x.x

ccm-manager mgcp

no ccm-manager fax protocol cisco

ccm-manager music-on-hold

ccm-manager config server x.x.x.x

ccm-manager config

mgcp

mgcp call-agent x.x.x.x 2427 service-type mgcp version 0.1

mgcp rtp unreachable timeout 1000 action notify

mgcp modem passthrough voip mode nse

mgcp package-capability rtp-package

mgcp package-capability sst-package

mgcp package-capability pre-package

no mgcp package-capability res-package

no mgcp timer receive-rtcp

mgcp sdp simple

mgcp rtp payload-type g726r16 static

mgcp bind control source-interface GigabitEthernet0/0

mgcp bind media source-interface GigabitEthernet0/0

mgcp profile default

sccp local GigabitEthernet0/0

sccp ccm x.x.x.x identifier 1

sccp ccm x.x.x.x. identifier 2

sccp ccm x.x.x.x identifier 3

sccp ccm x.x.x.x identifier 4

sccp

sccp ccm group 1

bind interface GigabitEthernet0/0

associate ccm 1 priority 1

associate ccm 2 priority 2

associate ccm 3 priority 3

associate profile 1 register CFB_xxxx

switchback method graceful

dspfarm profile 1 conference

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

codec g729br8

maximum sessions 8

associate application SCCP

call-manager-fallback

max-conferences 12 gain -6

transfer-system full-consult

limit-dn 7935 1

limit-dn 7940 6

limit-dn 7960 6

timeouts interdigit 4

ip source-address x.x.x.x port 2000

max-ephones 350

max-dn 300 dual-line

transfer-pattern 9.T

transfer-pattern .T

transfer-pattern 7...

translation-profile incoming ADD719

translation-profile outgoing REMOVE719

time-format 24

date-format dd-mm-yy

many thanks

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion