H-REAP supported APs

Answered Question
Aug 13th, 2009
User Badges:

Hi,

I have one and quick question. I am planning a new installation and have tested the functionality with 1242 APs. For the real project I doubt whether it is supported for the new 1141 APs. The only statement I managed to find is that 1130, 1240 and 1250 Series APs that support H-REAP functionality.


I would like to ask if somebody can tell me which Lightweight AP are working with H-REAP. It is important to be sure...


Georgi

Correct Answer by Rob Huffman about 7 years 9 months ago

Hi Georgi,


Yes, H-REAP is supported on the 1140 series of AP's. Some of the older docs have not been updated to reflect this change, but this info is included in newer versions;


Hybrid REAP is supported only on the 1130AG, **1140, 1240AG, 1250, and AP801 access points and on the 5500, 4400, and 2100 series controllers.


http://www.cisco.com/en/US/docs/wireless/controller/6.0/configuration/guide/c60hreap.html



Hope this helps!

Rob

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Scott Fella Thu, 08/13/2009 - 06:23
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

Georgi,


I have used all the models you have listed in H-REAP. They all work... the only thing is that the 1142 requires the 5.2 or higher code.

Correct Answer
Rob Huffman Thu, 08/13/2009 - 06:27
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Georgi,


Yes, H-REAP is supported on the 1140 series of AP's. Some of the older docs have not been updated to reflect this change, but this info is included in newer versions;


Hybrid REAP is supported only on the 1130AG, **1140, 1240AG, 1250, and AP801 access points and on the 5500, 4400, and 2100 series controllers.


http://www.cisco.com/en/US/docs/wireless/controller/6.0/configuration/guide/c60hreap.html



Hope this helps!

Rob

glakovski Thu, 08/13/2009 - 06:33
User Badges:

Yes it helps. That's what I needed...

I appears that I haven't searched enough... But it is easier to ask :)


Thanks, that's not the first time you help me...

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode