Anyconnect profile using Cisco Secure Desktop

Unanswered Question
Aug 13th, 2009
User Badges:


I have configured multiple Anyconnect TunnelGroup profiles with each is own policy (ip pool, radius ...) Each TunnelGroup is forced under the .xml file deployed with annyconnect under the <UserGroup>tunnelgroup</UserGroup> section of the .xml file.

Good news it works great !

But now activating Cisco Secure Desktop everyuser felt under the DefaultWEBVPNGroup and the <UserGroup> section of the xml doesn't seems to be used anymore.

Is there a way to continue to have automatic profile selection with CSD working ?

Of course if I enable the manual choice of profile at login this works even with CSD.

Thanks for your help

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
vmoopeung Wed, 08/19/2009 - 09:40
User Badges:
  • Bronze, 100 points or more

User profiles are created by an administrator and are automatically delivered to a client machine during connection setup. Profiles provide basic information about connection setup, and users cannot manage or modify them.

Refer to the below URL for more info:

ccr_cisco Thu, 08/20/2009 - 00:26
User Badges:

Thanks for your reply. I (administrator)created the xml profile and is well delivered. My only problem is when I activate SecureDesktop is seems that the UserGroup contained on the xml profile is not take into account as every users get to the default group.

Is there a when to use the UserGroup of the profile even with SecureDesktop ?


This Discussion