cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
604
Views
5
Helpful
2
Replies

Stop Async modem auto answering.

graham_burke
Level 1
Level 1

Hi,

This has me racking my brains for what should be (and no doubt is) a simple request.

I have a wic-1am-v2 installed in a 2801 (adv ip 124(24.T1)) , i am using this for a outgoing dialer.I wish to stop this modem auto answering.

NAME: "WIC/VIC/HWIC 1", DESCR: "WAN Interface Card - One Port Analog Modem(Version 2)"

PID: WIC-1AM-V2 , VID: V01 ,

interface Async0/1/0

no ip address

encapsulation ppp

dialer in-band

dialer pool-member 10

async mode interactive

end

Does anyone have any ideas short of sending a direct AT command to the modem card?

For ref I know that for a bri i can use the following with great success

"isdn caller 12345678912"

" isdn reject data" etc etc

Thanks in advance

Graham

2 Replies 2

paolo bevilacqua
Hall of Fame
Hall of Fame

You can issue commands with regular reverse telnet.

If you can do a reverse telnet into the modem from the router, as Paolo suggests, I think you could just enter the following command to disable auto-answer and save the setting to nvram.

ats0=0&w

You can check the modem settings with the following command:

at&v

HTH

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: