PBR with ADSL and LL

Unanswered Question
Aug 14th, 2009

Hi ALL

I have a Internet Router with ADSL and Serial Module , I want that only SMTP traffic will go through the Lease Line and rest i.e. http ftp https etc should go out from ADSL.

Regards/Asfar

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
asfar.zaidi Fri, 08/14/2009 - 21:45

Hi

I am configuring my router like this

!

interface FastEthernet0/0

ip address 192.168.200.1 255.255.255.0

ip policy route-map ADSL

ip nat inside

duplex auto

speed auto

!

interface Serial0/1/0

ip address xx.xx.xx.xx 255.255.255.252

ip virtual-reassembly

no ip route-cache cef

no ip route-cache

!

interface ATM0/3/0

no ip address

ip virtual-reassembly

no ip mroute-cache

no atm ilmi-keepalive

dsl operating-mode auto

pvc 0/50

encapsulation aal5mux ppp dialer

dialer pool-member 1

!

!

interface Dialer1

ip address negotiated

ip virtual-reassembly

encapsulation ppp

ip nat outside

dialer pool 1

dialer idle-timeout 2147483

dialer-group 1

no cdp enable

ppp authentication pap callin

!

ip nat inside source route-map ADSL interface Dialer1 overload

ip route 0.0.0.0 0.0.0.0 Serial0/1/0

!

!

access-list 1 permit any

access-list 102 permit tcp any any eq www

access-list 102 permit tcp any any eq 8080

access-list 102 permit tcp any any eq 443

access-list 102 permit tcp any any eq ftp

access-list 102 permit tcp any any eq domain

access-list 102 permit udp any any eq domain

!

route-map ADSL permit 10

match ip address 102

set interface Dialer1

Check if i am doing any thing wrong

Regards/Asfar

Actions

This Discussion