Cisco 2821 - E1 PRI and PVDM issue

Unanswered Question
Aug 17th, 2009
User Badges:

Hi all ;

I have problem with my router and E1 , whenever I dial E1 number it has mute call , router answer but there is no handshake sound , attach you may find configuration , please consider that this is really urgent for me to fix this issue .

NAME: "2821 chassis", DESCR: "2821 chassis"

PID: CISCO2821 , VID: V03 , SN:

NAME: "36 port PVDMII digital modem on Slot 0 SubSlot 4", DESCR: "36 port PVDMII

digital modem"

PID: PVDM2-36DM , VID: V01 , SN:

NAME: "PVDMII DSP SIMM with four DSPs on Slot 0 SubSlot 5", DESCR: "PVDMII DSP S

IMM with four DSPs"

PID: PVDM2-64 , VID: V01 , SN:

NAME: "Two Port Channelized E1/T1/PRI with Integrated CSU on Slot 2", DESCR: "Tw

o Port Channelized E1/T1/PRI with Integrated CSU"

PID: , VID: 1.0, SN:

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
paolo bevilacqua Mon, 08/17/2009 - 09:59
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

First of all you should upgrade you IOS as you're still running the initial version of 12.4-9T, likely buggy.

Then, you should have clock source line and network-clock-participate and -select.

Also note, the PVDM2-64 for voice, will not work with the channelized PRI card for data. It works exclusively with cards that have V in the part number, likve VWIC.

Finally, please do not put time pressure for answers, as this is a free forum, not a paid for service.


This Discussion