08-17-2009 09:38 PM - edited 03-15-2019 07:24 PM
Hi,
My customer wants that when they get call on main number, that should be ringing on 4 different extensions same time. If anybody knows how to do that, could you please share how to do it.
Thanks
08-17-2009 11:31 PM
Hello,
"Parallel Hunt Groups" feature would help you. However, CME 4.3 is required for this. See link below: http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmecover.html#wp1145800
08-18-2009 03:51 AM
Hi,
Could you please let us know what version of CME you are using?
Regards
Wilson Samuel
08-18-2009 08:08 AM
Right now I am using 4.1 but I will upgrade to 4.3 or 7.0.
Thanks.
08-18-2009 08:10 AM
You can do it with 4.1 using shared lines. However if you expect multiple calls into that DN, there is a special "chained overlay" configuration that you must do,
In CME 7.x you also have octo-lines DN for shared lines that avoid doing the chained/overlay referenced above,
Please remember to rate useful posts with the scrollbox below.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide