08-17-2009 09:38 PM - edited 03-15-2019 07:24 PM
Hi,
My customer wants that when they get call on main number, that should be ringing on 4 different extensions same time. If anybody knows how to do that, could you please share how to do it.
Thanks
08-17-2009 11:31 PM
Hello,
"Parallel Hunt Groups" feature would help you. However, CME 4.3 is required for this. See link below: http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmecover.html#wp1145800
08-18-2009 03:51 AM
Hi,
Could you please let us know what version of CME you are using?
Regards
Wilson Samuel
08-18-2009 08:08 AM
Right now I am using 4.1 but I will upgrade to 4.3 or 7.0.
Thanks.
08-18-2009 08:10 AM
You can do it with 4.1 using shared lines. However if you expect multiple calls into that DN, there is a special "chained overlay" configuration that you must do,
In CME 7.x you also have octo-lines DN for shared lines that avoid doing the chained/overlay referenced above,
Please remember to rate useful posts with the scrollbox below.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: