Turn off Status LED on LWAP 1130

nowcommsupport · ‎08-19-2009

Hi there,

We have mounted some access points in a couple of cinemas and we are concerned that the lights on the AP's will be a distraction. Does any one know if it's possible to turn off the status LED on the face of the Access Point, and how to do it?

Thanks!

Mike.

Rob Huffman · ‎08-19-2009

Hi Mike,

Most possible my friend :)

config ap led-state

To enable or disable the LED-State for an access point, use the config ap led-state command.

config ap led-state {enable | disable} {Cisco_AP | all}

Syntax Description

config

Display configurations.

ap

Advanced parameters.

led-state

Enable or disable the LED-State for an access point.

{enable | disable}

Enable or disable the access point's LED-State.

{Cisco_AP | all}

Name of a Cisco 1000 Series lightweight access point or all to specify all access points.

http://www.cisco.com/en/US/docs/wireless/controller/4.1/command/reference/clic1.html#wp2384867

Hope this helps!

Rob