08-19-2009 03:30 AM - edited 02-21-2020 04:19 PM
Hello,
I have read the feature guide "IPSec Virtual Tunnel Interface"(http://www.cisco.com/en/US/docs/ios/12_3t/12_3t14/feature/guide/gtIPSctm.html) and I have some questions:
IPsec packet flow into the IPsec tunnel is illustrated in Figure 3(http://www.cisco.com/en/US/docs/ios/12_3t/12_3t14/feature/guide/gtIPSctm.html#wp1047929). If I configure different PBRs for inside interface,outside interface and VTI in what sequence they will be looked up?
Regards,
Aleksei
08-25-2009 02:22 PM
Policy-based routing includes a mechanism for selectively applying policies based on access list, packet size or other criteria. The actions taken can include routing packets on user-defined routes, setting the precedence, type of service bits, etc.
Policy routing is specified on the interface that receives the packets, not on the interface from which the packets are sent.
This explains about the policy based routing with an example:
http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009481d.shtml#intro
08-25-2009 07:53 PM
sadbulali,
Thanks for your reply. I have read this before.
Could you look at Figure 3 and answer my question?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: