Can't get 5510 to talk to ssm-10

Answered Question
Aug 19th, 2009
User Badges:

Hi


Trying to get the asdm to talk to the ips card, I click on the tab, confirm the ip address, but it never talks with the card and never has.


Any helps please guys?

Thanks

Kev

Correct Answer by acomiskey about 7 years 11 months ago

You can session to the card via the cli without the interface but I think you need to actually use the interface to see it through asdm.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
acomiskey Wed, 08/19/2009 - 07:08
User Badges:
  • Green, 3000 points or more

Do you have something like this in the ssm??


service-host

network-settings

access-list /32

or

access-list 0.0.0.0/0

ktwaddell Wed, 08/19/2009 - 07:29
User Badges:

Hi


I have access-list 0.0.0.0/0 on it just rule out any acl issues.


Thsi might seem a stupid question but do I need to use the management port on the ssm for the asdm to see it, I assumed the asdm could just talk to ssm card.


Tahnks

kev

Correct Answer
acomiskey Wed, 08/19/2009 - 07:35
User Badges:
  • Green, 3000 points or more

You can session to the card via the cli without the interface but I think you need to actually use the interface to see it through asdm.

ktwaddell Wed, 08/19/2009 - 07:40
User Badges:

oh yes I've clearly sessioned on to it, but I just expected the asdm to be able to see the card and work, but having found a post about 10 minutes ago of a guy that had cabled it up and no one pulled him on it.



ktwaddell Thu, 08/20/2009 - 02:44
User Badges:

To confirm it was because we hadn't cabled up the management port ont he same vlan as the asa, we always expected the asdm to work with e ssm-10 inline.


Thanks

Kev

Actions

This Discussion