CSS/ACE response time for HTTP 200 ok

Unanswered Question
Aug 20th, 2009
User Badges:


Is there any show command available for CSS/ACE to display eg. HTTP 200 response time per client request.

Our SLA is to serve HTTP200 within 1 sec after the 1st request is send to web server from the CSS/ACE

My search on this forum suggest sniffer. Any other alternative.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Gilles Dufour Thu, 08/20/2009 - 06:18
User Badges:
  • Cisco Employee,

Are you trying to make sure the ACE/CSS does not delay the response ?

Or do you want the ACE/CSS to detect if the server is too slow to respond ?

On the ACE you can set a probe max response time to 1sec and if the response does not come within this time, the probe goes down.

The command on ACE, under the probe config is :

receive Configure max time to wait inorder to receive reply from server

Otherwise, the sniffer trace if you just want to have a look and make sure about the time.



This Discussion