08-20-2009 06:12 AM - edited 03-15-2019 07:26 PM
Hi,
we append a 5 digit code to all mobile numbers dialed within the Route Pattern in order to get a reduced tariff over the mobile phone network.
The calling party then sees the mobile number with the 5 digits appended as the called number on their Cisco handset. Is there a way of stripping the 5 digits so that the original mobile number (11 digits) shows as the number called on the Cisco handset as some of our users are perplexed when they see the number displayed is not the number they called ie 5 digits + the mobile number?
Regards
Solved! Go to Solution.
08-26-2009 08:02 AM
You can either strip digits by configuring the Incoming Prefix service parameters in the Service Parameters window or by configuring the Strip Digits fields in the Device Pool, Gateway, or Trunk Configuration windows.
08-26-2009 08:02 AM
You can either strip digits by configuring the Incoming Prefix service parameters in the Service Parameters window or by configuring the Strip Digits fields in the Device Pool, Gateway, or Trunk Configuration windows.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide