Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
4481
Views
0
Helpful
6
Replies

Use Cisco SNMP ping mib

Go to solution
dj_oberry
Level 1
Level 1

‎08-20-2009 08:57 AM

Hello, I am trying to use the mib on this page:

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094e8e.shtml

This is the line I am having issues with:

snmpset -c public Router_Source .1.3.6.1.4.1.9.9.16.1.1.1.3.333 octetstringhex “AB 44 76 67”

I can, using a linux server, get to the last part of the command, where I enter my remote ip in hex that I want to ping, but it will not go any further.

Here is what I get:

snmpset -c communitystring routerip .1.3.6.1.4.1.9.9.16.1.1.1.3.333 octetstringhex "AC 18 00 02"

.1.3.6.1.4.1.9.9.16.1.1.1.3.333: Unknown Object Identifier (Sub-id not found: (top) -> AC 18 00 02)

I tried without the quotes and get this error:

snmpset -c communitystring routerip .1.3.6.1.4.1.9.9.16.1.1.1.3.333 octetstringhex AC 18 00 02

18: Bad object type: 0

I have tried with quotes, without quotes, spaces and no spaces. Can someone point out what I'm missing? Thanks.

I removed the community and router ip obviously. Those are present in the command when I try running it.

Labels:
0 Helpful
1 Accepted Solution

Accepted Solutions

Go to solution
Joe Clarke
Cisco Employee
Cisco Employee
In response to dj_oberry

‎08-20-2009 10:05 AM

No. net-snmp defaults to SNMPv3. Try:

snmpset -v 1 -c communitystring routerip .1.3.6.1.4.1.9.9.16.1.1.1.3.333 x "AC 18 00 02"

View solution in original post

0 Helpful
6 Replies 6

Go to solution
Joe Clarke
Cisco Employee
Cisco Employee

‎08-20-2009 09:04 AM

I assume you're using net-snmp. If so, the command is:

snmpset -c communitystring routerip .1.3.6.1.4.1.9.9.16.1.1.1.3.333 x "AC 18 00 02"

0 Helpful

Go to solution
dj_oberry
Level 1
Level 1
In response to Joe Clarke

‎08-20-2009 10:03 AM

I now get this message using that:

snmpset -c communitystring routerip .1.3.6.1.4.1.9.9.16.1.1.1.3.333 x "AC 18 00 02"

snmpset: No securityName specified

I'm guessing that there is an additional setting in the router I need at this point?

0 Helpful

Go to solution
Joe Clarke
Cisco Employee
Cisco Employee
In response to dj_oberry

‎08-20-2009 10:05 AM

No. net-snmp defaults to SNMPv3. Try:

snmpset -v 1 -c communitystring routerip .1.3.6.1.4.1.9.9.16.1.1.1.3.333 x "AC 18 00 02"

0 Helpful

Go to solution
dj_oberry
Level 1
Level 1
In response to Joe Clarke

‎08-20-2009 10:14 AM

v 1 failed, but v 2c gets me this, which looks to be right? (Sorry not sure if this is the response I'm needing or if I should get another.)

snmpset -v2c -c communitystring routerip .1.3.6.1.4.1.9.9.16.1.1.1.3.333 x "AC 18 00 02"

SNMPv2-SMI::enterprises.9.9.16.1.1.1.3.333 = Hex-STRING: AC 18 00 02

0 Helpful

Go to solution
Joe Clarke
Cisco Employee
Cisco Employee
In response to dj_oberry

‎08-20-2009 10:20 AM

Yep, this is what you should see. The set operation worked.

0 Helpful

Go to solution
dj_oberry
Level 1
Level 1
In response to Joe Clarke

‎08-20-2009 10:22 AM

thanks. :)

0 Helpful
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents