MCS 7835 Hardware Capability

Answered Question
Aug 20th, 2009

two CM7 MCS7835's. I need to know if the NIC supports Gig. I can show network eth0 and see what its set to, but cant see its capabilities like I can in the windows world with device manager. thanks

Correct Answer by Jaime Valencia about 7 years 6 months ago

The data sheets have that kind of info:


Cisco MCS 7835-H1



Network Connectivity


Network Interface Card (NIC)


Dual onboard 10/100/1000


Connector


Two RJ-45 connectors on rear of server


10BASE-T Cable Support


Categories 3, 4, or 5 unshielded twisted-pair (UTP) (2 or 4 pair) up to 328 ft (100m)


100BASE-TX Cable Support


Category 5 UTP (2 pair) up to 328 ft (100m)


1000BASE-T Cable Support


Category 5 UTP, 5E UTP,or 6 UTP (2 pair) up to 328 ft (100m)


http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/product_data_sheet0900aecd801c12f0.html


HTH


java


if this helps, please rate

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.5 (2 ratings)
Loading.
Ronald Spencer Thu, 08/20/2009 - 12:15

One thing that would be important to know is what the letters after MCS7835 say.


I don't know about all 7835 platforms, but my i1's are all the same, Gigabit Ethernet.


Hope this helps.

Correct Answer
Jaime Valencia Thu, 08/20/2009 - 12:38

The data sheets have that kind of info:


Cisco MCS 7835-H1



Network Connectivity


Network Interface Card (NIC)


Dual onboard 10/100/1000


Connector


Two RJ-45 connectors on rear of server


10BASE-T Cable Support


Categories 3, 4, or 5 unshielded twisted-pair (UTP) (2 or 4 pair) up to 328 ft (100m)


100BASE-TX Cable Support


Category 5 UTP (2 pair) up to 328 ft (100m)


1000BASE-T Cable Support


Category 5 UTP, 5E UTP,or 6 UTP (2 pair) up to 328 ft (100m)


http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/product_data_sheet0900aecd801c12f0.html


HTH


java


if this helps, please rate

Actions

This Discussion