No Access to 3750 Console

Unanswered Question
Aug 20th, 2009
User Badges:

I'm using Secure Crt for console access to all cisco devices. This morning i can no loger communicate with cisco 3750's through console port, i tried on 3 different 3750's with same result. That same secure crt set up worked fine with firewall and switches. Any clues of what is wrong? Thx.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Lucien Avramov Thu, 08/20/2009 - 12:45
User Badges:
  • Red, 2250 points or more

Check the cable connection, try putty or hyperterminal.

Perhaps it may be also a problem on your pc, reboot that one as well.

On hyperterminal click on DEFAULT for the serial connection settings.

John Blakley Thu, 08/20/2009 - 12:49
User Badges:
  • Purple, 4500 points or more

Make sure that you're actually at the default speed of 9600 baud. Try different speeds etc.



glen.grant Thu, 08/20/2009 - 12:57
User Badges:
  • Purple, 4500 points or more

If you have rebooted since using it on the firewalls and you are using a usb connector check to make sure the pc didn't use a different com port when it rebooted.

nguyenvinnie Thu, 08/20/2009 - 15:19
User Badges:

undocked the laptop Secure Crt re-acted funny :-), I tried using the Hyperterm and it works fine. Thanks everyone.


This Discussion