08-20-2009 12:42 PM - edited 03-06-2019 07:21 AM
I'm using Secure Crt for console access to all cisco devices. This morning i can no loger communicate with cisco 3750's through console port, i tried on 3 different 3750's with same result. That same secure crt set up worked fine with firewall and switches. Any clues of what is wrong? Thx.
08-20-2009 12:45 PM
Check the cable connection, try putty or hyperterminal.
Perhaps it may be also a problem on your pc, reboot that one as well.
On hyperterminal click on DEFAULT for the serial connection settings.
08-20-2009 12:49 PM
Make sure that you're actually at the default speed of 9600 baud. Try different speeds etc.
HTH,
John
08-20-2009 12:57 PM
If you have rebooted since using it on the firewalls and you are using a usb connector check to make sure the pc didn't use a different com port when it rebooted.
08-20-2009 03:19 PM
undocked the laptop Secure Crt re-acted funny :-), I tried using the Hyperterm and it works fine. Thanks everyone.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: