08-20-2009 07:39 PM
Hi everyone,
Is there a way to monitor the fan on the PS via snmp? any oid for this.
from sh env:
Power Supply 1 is present.
Fan status: Warning - failure
Input Voltage status: normal
DC Output Voltage status: normal
Power Supply 2 is present.
Fan status: normal [[[[[-----am interested in this fan!!!
Input Voltage status: normal
DC Output Voltage status: normal
48V Power Supply 3 is not present.
48V Power Supply 4 is not present.
Fan 1 Failed [[[[--------not this fan
Board Temperature: normal.
Appreciate your replies. Thanks.
Solved! Go to Solution.
08-20-2009 08:39 PM
There is no specific object for the PS fan in this version of IOS. However, it does support the ciscoEnvMonSupplyStatusTable. The ciscoEnvMonSupplyState object will give you the overall status of the power supply.
08-20-2009 07:50 PM
What type of device is this, and what version of code is it running?
08-20-2009 08:04 PM
Hi Joe,
c3745 router /c3745-jk9s-mz.122-8.T8.bin.
08-20-2009 08:39 PM
There is no specific object for the PS fan in this version of IOS. However, it does support the ciscoEnvMonSupplyStatusTable. The ciscoEnvMonSupplyState object will give you the overall status of the power supply.
08-20-2009 09:54 PM
Thanks Joe. Will have to contend with this. Appreciate your quick response.
08-20-2009 08:03 PM
Got this object, caemSupplyFailedComponent, from CISCO-ACCESS-ENVMON-MIB, but i'm not getting the response from an snmpwalk that I expect. Still doesn't indicate the failure of the fan on the PS.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: