cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
751
Views
0
Helpful
2
Replies

Music-On-Hold is not working at internal call

MaungSanYu
Level 1
Level 1

Hi all,

I already cange the MOH file at Telephony-service.

After that change, all of the call coming from outside can hear new MOH but internal call cannot hear that new MOH.

Is there any command to add?

If any, anyone pls guide me.

Thanks

1 Accepted Solution

Accepted Solutions

Hi Maung,

As you said telephony-service I suposse you are running a CallManager Express, if that is, you should configure multicast, like this:

telephony-service

moh music-on-hold.au

multicast moh 239.0.1.1 port 2000

Try it and see if this is the solution.

Hope this helps,

JC Arias

View solution in original post

2 Replies 2

Dennis Mink
VIP Alumni
VIP Alumni

are you running moh multicast under srst in conjunction with CUCM?

Please remember to rate useful posts, by clicking on the stars below.

Hi Maung,

As you said telephony-service I suposse you are running a CallManager Express, if that is, you should configure multicast, like this:

telephony-service

moh music-on-hold.au

multicast moh 239.0.1.1 port 2000

Try it and see if this is the solution.

Hope this helps,

JC Arias

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: