Bridge 1300 building to building link for VOIP Data Rates settings and QoS

Unanswered Question
Aug 21st, 2009
User Badges:

Hi,

What are the recomendations for data rates settings of wlan fo using voip in a link building to building.

Default is

speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0

54.0

Should i maintain or change to what?


Also what QoS should i apply?

Thks

Best Regards

Marco

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
pradeepde Thu, 08/27/2009 - 13:46
User Badges:
  • Bronze, 100 points or more

OFDM is a physical layer encoding technology for transmitting signals through the RF. This method breaks one high-speed data carrier into several lower-speed carriers that transmit in parallel across the particular RF spectrum. OFDM, when used with various modulation types such as 802.11g and 802.11a, is capable of supporting data rates as high as 54 Mbps.


http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/5_0_1/english/administration/guide/7921wrnt.html#wp1085347

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode