IP Phone clicking noise

Unanswered Question
Aug 21st, 2009
User Badges:

I have an new issue with our IP phones at one of our campuses that are making a clicking noise all of a sudden - this site has been up and running on IP phones for over a year and nothing in the configurations have changed. The callers on the remote end do not hear it though. We have Auto QoS in place and have a large metro-e pipe out of this location so i do not think it is QoS related but.......

- any ideas would be appreciated


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
jaschulz Fri, 08/21/2009 - 12:19
User Badges:
  • Bronze, 100 points or more

I had a similar issue a couple of years ago that disabling VAD corrected. Might be worth a try.

pcaltagirone22 Fri, 08/28/2009 - 06:06
User Badges:

Thanks - Actually it was one of the three PRIs trunked into that site. It was showing slips along with tons of input errors and CRCs on the serial interface counters. After getting the LEC on the phone they confirmed that there was an issue at the CO and got it resolved pretty quickly. Until they resolved it I just moved that PRI to the bottom of the outbound Route Group and had the LEC drop it to the bottom on their inbound hunt list to minimize impact


This Discussion