08-23-2009 02:07 PM - edited 03-06-2019 07:22 AM
Does anyone know any real world failover times for this scenario.
VSS with 6748-GE-TX w/ No DFC running 12.2(33)SXI2
According to what I have read on CCO there should be no packet loss just bandwidth reduction of 50%.
During SSO supervisor switchover, when the IOS images match, do the linecards still have to reset?
What about during eFSU ISSU upgrades? It looks like without DFC you would have a linecard reset. Wouldn't that reset occur on both supervisors?
08-23-2009 06:32 PM
Michael,
I used eFSU to upgrade 2 of my VSS switches from SXI to SXI2. This function works as advertised. We did not lose a single ping packet and the only thing that you lose is 50% of your bandwidth for a short time.
Remember, this only works if you are upgrading from one major release to another (i.e. SXI to SXI2).
HTH
Reza
08-23-2009 06:35 PM
Do all of your line cards have DFC-3C cards in them?
08-23-2009 06:43 PM
Our 10 Gig cards do but not 1 Gig cards
08-23-2009 07:49 PM
I read in the VSS eFSU documentation that without the DFC cards in the line cards you would experience a line card reset. Did this occur on the your non-DFC enabled cards? Do you recall how much time passed during the reset? Did the servers just continue to pass traffic on the other active VSS switch?
04-30-2014 08:47 AM
Hi Mlouis
Can you please share the document which is mentioning that without DFC cards in the line cards you would experience line card reset
05-03-2014 05:54 AM
Hi Mlouis
Can you please share the document which is mentioning that without DFC cards in the line cards you would experience line card reset
04-30-2014 07:33 AM
Hi Reza
Using EFSU, I want to upgrade the Cat.6513 switches running in VSS with currently installed IOS -ipservicesk9_wan-mz.122-33.SXI3.bin.
Want to upgrade to lastest available version in SXI which is SXI13
Eager to understand from members here how successful ISSU is on 65xx platform and does it really mean zero downtime impact?
Any practical experience from those who performed upgrade in VSS scenerio using EFSU
When standby chassis get reloaded in ISSU loadversion step then only all the modules (Service modules & line cards) on standby chassis get reloaded or the modules on Active chassis will also get reloaded.
When Active chassis get reloaded during switchover in ISSU runversion then only the modules (Service modules & line cards) on Active chassis get reloaded or the modules on standby chassis will also get reloaded.
I have service modules installed in both the chassis. Does EFSU have any dependency on these service modules.
Mod Ports Card Type Model
--- ----- -------------------------------------- ------------------
3 1 Application Control Engine Module ACE20-MOD-K9
4 6 Firewall Module WS-SVC-FWM-1
5 8 Intrusion Detection System WS-SVC-IDSM-2
6 8 Network Analysis Module WS-SVC-NAM-2-250S
7 5 Supervisor Engine 720 10GE (Active) VS-S720-10G
9 8 CEF720 8 port 10GE with DFC WS-X6708-10GE
10 8 CEF720 8 port 10GE with DFC WS-X6708-10GE
11 48 CEF720 48 port 1000mb SFP WS-X6748-SFP
12 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX
13 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX
05-03-2014 06:02 AM
Hi Reza
Using EFSU, I want to upgrade the Cat.6513 switches running in VSS with currently installed IOS -ipservicesk9_wan-mz.122-33.SXI3.bin.
Want to upgrade to lastest available version in SXI which is SXI13
Eager to understand from members here how successful ISSU is on 65xx platform and does it really mean zero downtime impact?
Any practical experience from those who performed upgrade in VSS scenerio using EFSU
When standby chassis get reloaded in ISSU loadversion step then only all the modules (Service modules & line cards) on standby chassis get reloaded or the modules on Active chassis will also get reloaded.
When Active chassis get reloaded during switchover in ISSU runversion then only the modules (Service modules & line cards) on Active chassis get reloaded or the modules on standby chassis will also get reloaded.
I have service modules installed in both the chassis. Does EFSU have any dependency on these service modules.
Mod Ports Card Type Model
--- ----- -------------------------------------- ------------------
3 1 Application Control Engine Module ACE20-MOD-K9
4 6 Firewall Module WS-SVC-FWM-1
5 8 Intrusion Detection System WS-SVC-IDSM-2
6 8 Network Analysis Module WS-SVC-NAM-2-250S
7 5 Supervisor Engine 720 10GE (Active) VS-S720-10G
9 8 CEF720 8 port 10GE with DFC WS-X6708-10GE
10 8 CEF720 8 port 10GE with DFC WS-X6708-10GE
11 48 CEF720 48 port 1000mb SFP WS-X6748-SFP
12 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX
13 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: