Local updater ID is on interface EO0/0

Unanswered Question
Aug 23rd, 2009
User Badges:

I have a 6509 that is setup as a VTP server and my 3750 is a client.

I am getting "Local updater ID is on interface EO0/0 (first interface found)" what is the meaning of this.

Core_Switch_2#sh vtp status

VTP Version : 2

Configuration Revision : 68

Maximum VLANs supported locally : 1005

Number of existing VLANs : 20

VTP Operating Mode : Server

VTP Domain Name : Hyderabad

VTP Pruning Mode : Enabled

VTP V2 Mode : Enabled

VTP Traps Generation : Enabled

MD5 digest : 0x0E 0xBA 0xE6 0x35 0x08 0x99 0x0F 0xB0

Configuration last modified by at 8-22-09 06:08:19

Local updater ID is on interface EO0/0 (first interface found)


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Giuseppe Larosa Mon, 08/24/2009 - 00:23
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Navinder,

addresses like are used for communication between modules on a C6500 chassis they are not allowed to exit the box as they are loopback addresses.

interface eo 0/0 should be for out of band management.

Hope to help


navinder.singh Mon, 08/24/2009 - 21:11
User Badges:

Thank you for the vital information, however, as per our understanding in the "Configuration last modified by at 8-22-09 06:08:19", the ip should be the ip of the port or Vlan from which the update has been done.

why I am getting as the configuration last modified IP.



This Discussion