08-24-2009 01:03 AM - edited 03-04-2019 05:49 AM
Hi
I have a 7613 router with image "c7600rsp72043-adventerprisek9-mz.122-33.SRD2.bin" but my router cannot enable my SPA-4XOC3-ATM. I am getting this message "SPA-4XOC3-ATM card in subslot 1/0 is being disabled because of an incompatible FPD
image version. Note that the c7600-fpd-pkg.122-33.SRD2.pkg package will be required if you want to perform the upgrade operation". My problem here is how do I check the version before downloading the ios required? this is a new router and the ios that is on this router is the latest IOS.
Solved! Go to Solution.
08-24-2009 01:13 AM
Hello Mpho,
my understanding is that the device is asking you to upgrade the firmware (FPD) of the SPA using the specified file:
c7600-fpd-pkg.122-33.SRD2.pkg
So you should download this file that is not an ios image from cisco site and you should put it on the flash.
Hope to help
Giuseppe
08-24-2009 01:13 AM
Hello Mpho,
my understanding is that the device is asking you to upgrade the firmware (FPD) of the SPA using the specified file:
c7600-fpd-pkg.122-33.SRD2.pkg
So you should download this file that is not an ios image from cisco site and you should put it on the flash.
Hope to help
Giuseppe
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide