QoS on 6500/7600

Unanswered Question
Aug 24th, 2009
User Badges:

I'm faced with the task of matching and giving priority to some traffic out an interface. This needs to happen in the same box (6500/7600). I have tried the config below, but it doesn't work. Looks like the matching of traffic doesn't work. Sniffing the traffic out the interface reveals that the "set dscp 40" doesn't happen.

I'm am a little lost. Any pointers?


** relevant onfig **

mls qos

!

# this is default

# mls qos map dscp-cos 40 to 5

!

access-list 70 permit 10.234.237.131

!

class-map match-any Test1_QoS

match access-group 70

!

policy-map Test1_Pol

class Test1_QoS

set dscp 40

!

interface GigabitEthernet9/12

wrr-queue bandwidth percent 80 19 1

wrr-queue cos-map 2 1 2 5

!

interface Vlan440

service-policy output Test1_Pol


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
dominic.caron Mon, 08/24/2009 - 07:38
User Badges:
  • Silver, 250 points or more

Hi,


I'm not 100% sure, but I think the 6500 support ingress QOS on port and vlan interfaces and egress only on port interfaces.



Actions

This Discussion