08-24-2009 08:25 AM - edited 03-11-2019 09:08 AM
Is is possible to edit and update the startup-config on an ASA5505 remotely.
I need to change the IP & default gateway remotely prior to a switch over of ISP. I had hoped to edit the startup before it changed but it doesn't seem possible.
Thanks,
Solved! Go to Solution.
08-24-2009 04:55 PM
Hi,
try THIS :
copy the existing running config to a tftp server.
copy run tftp
change the ip and d.g. in the running config file on tftp server.
copy the same file to startup
copy tftp start
Once ASA is rebooted,it would come back up with changed settings.
Plz rate if helps.
Regards,
Sushil
08-24-2009 04:55 PM
Hi,
try THIS :
copy the existing running config to a tftp server.
copy run tftp
change the ip and d.g. in the running config file on tftp server.
copy the same file to startup
copy tftp start
Once ASA is rebooted,it would come back up with changed settings.
Plz rate if helps.
Regards,
Sushil
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide