Solved: Updating Startup-config ASA5505 - Cisco Community

595

Views

0

Helpful

1

Replies

Is is possible to edit and update the startup-config on an ASA5505 remotely.

I need to change the IP & default gateway remotely prior to a switch over of ISP. I had hoped to edit the startup before it changed but it doesn't seem possible.

Thanks,

1 Accepted Solution

Accepted Solutions

Hi,

try THIS :

copy the existing running config to a tftp server.

copy run tftp

change the ip and d.g. in the running config file on tftp server.

copy the same file to startup

copy tftp start

Once ASA is rebooted,it would come back up with changed settings.

Plz rate if helps.

Regards,

Sushil

View solution in original post

1 Reply 1

Hi,

try THIS :

copy the existing running config to a tftp server.

copy run tftp

change the ip and d.g. in the running config file on tftp server.

copy the same file to startup

copy tftp start

Once ASA is rebooted,it would come back up with changed settings.

Plz rate if helps.

Regards,

Sushil

Learn, share, save

Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.

New here? Get started with these tips. How to use Community New member guide

Log in to Community

Review Cisco Networking products for a $25 gift card