Solved: Enable SSH on all LAP's

Dominic Stalder (old profile) · ‎08-25-2009

Hi there

is it possible to enable SSH for all LAP's on a WLC console (and even on the GUI)? I only know the command "config ap ssh enable <Cisco AP>", is there a hidden command for all LAP's or a global command to enable SSH per default?

Thanks a lot and best regards

Dominic

Lucien Avramov · ‎08-25-2009

It does not seem to be a way on the CLI/ GUI of WLC for ALL the AP from one time click:

http://www.cisco.com/en/US/docs/wireless/controller/6.0/command/reference/cli60.html#wp8904301

If you have WCS, I think you can run a template to disable it on all the APs, but this does not exists on the CLI / GUI of WLC.

View solution in original post

Lucien Avramov · ‎08-25-2009

It does not seem to be a way on the CLI/ GUI of WLC for ALL the AP from one time click:

http://www.cisco.com/en/US/docs/wireless/controller/6.0/command/reference/cli60.html#wp8904301

If you have WCS, I think you can run a template to disable it on all the APs, but this does not exists on the CLI / GUI of WLC.

Dominic Stalder (old profile) · ‎08-25-2009

Hi lavramov

thanks a lot for your replay, what I expected but not what I wanted ;-)

We will solve it via WCS.

Best regards

Dominic