Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
502
Views
0
Helpful
3
Replies

AS5400 hardware conferencing / transcoding

alicia.vega
Level 1
Level 1

‎08-25-2009 02:29 AM - edited ‎03-15-2019 07:30 PM

Is it possible? Can anybody send me a configuration guide? THANKS!

Labels:
0 Helpful
3 Replies 3

Md. Mijanur Rahman
Level 4
Level 4

‎08-25-2009 02:38 AM

Hi, do have DSP inside it?

Answer is simple, if you have DSP then you can,if you don't have you can't.

You can see this link:http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080334294.shtml

HTH

0 Helpful

alicia.vega
Level 1
Level 1
In response to Md. Mijanur Rahman

‎08-25-2009 05:06 AM

Hi,

I have 16 PRIs and 20 x S5X-PVDM2-64, so I thought 4 S5X-PVDM2-64 are available for conferencing issues.

But I haven't found any document in Cisco talking about Conferencing & Transcoding in AS5400 devices.

Has anybody seen any document of configuration?

Thanks!

0 Helpful

Nicholas Matthews
Level 9
Level 9
In response to alicia.vega

‎08-25-2009 05:19 AM

Hi Alicia,

The 5x00 platforms do not support conferencing/transcoding/MTP. They are not intended to do any type of SCCP with CUCM.

There is a new platform, the VGD-1T3, which can do this.

I would suggest looking into that if you need to do conferencing / transcoding.

-nick

0 Helpful
Customers Also Viewed These Support Documents