I have a basic question on upgrading the IOS on a Catalyst 6513 (Sup 720 w/ PFC3A). I'm looking to install the following IOS binary: s72033-adventerprisek9_wan-mz.122-33.SXH5.bin.
In using the software advisor it says that I need 512 MB DRAM and 512 MB Flash. I know that I'm covered on the DRAM (from the show version). However, I am curious where I go to check the flash. I plan to install the binary on the compact flash and boot from there. Does this mean that my compact flash needs to be 512 MB in size? I notice that the image itself is only 78 MB in size. Am I looking at the wrong thing or should I be checking some other flash?
I attached a show version if it helps!
The flash memory is the compactflash card you insert in the sup720.
You can do a dir disk0: or dir disk1: depending on where it's inserted to see how much memory you have.
The flash memory is the size of the compact flash card.