08-26-2009 05:17 AM - edited 03-06-2019 07:26 AM
Hi,
I have three VLAN's configured in a C3560 Software (C3560-IPBASEK9-M), data, voice and WAN.
The WAN VLAN has two routers connected, I need to know how I can send voice traffic by one router and data traffic by another router, do you know how I can do it?.
Can I do it with this IOS?.
08-26-2009 06:02 AM
policy based routing, set next hop.
HTH>
08-26-2009 07:58 AM
Ok, thank you.
I got the IP services software, do you have the procedure for updating it ?.
Thank you !.
08-26-2009 08:09 AM
Luis
If you are running IP Services on your 3560 then it already supports PBR. You will however need to enable the SDM routing template ie.
3560(config)# sdm routing prefer
Jon
08-26-2009 08:17 AM
No, I have: Image Name c3560-ipbasek9-mz.122-40.SE.bin.
But I got: c3560-ipservicesk9-mz.122-40.SE.bin
So I need to know how to upgrade it ?.
08-26-2009 08:23 AM
Luis
Use this link to upgrade to IPServices -
Jon
08-26-2009 09:39 AM
Thank you by your support.
The procedure shows the next command:
archive download-sw /allow-feature-upgrade /overwrite /reload tftp:[[//location]/directory]/image-name.tar
I have an Bin file, I don't have the tar file.
Do you know If I can use this command with this Bin file?.
Thank you, best regards.
08-26-2009 08:09 AM
Errrr
Policy based routing - is part of route maps. Coupled with an access-list & set next hop routing = PBR.
All the above are in ALL versions of IOS I belive.
08-26-2009 08:18 AM
I found it:
¨¨¨The Cisco Catalyst 3560 is available with either the IP Base or IP Services software images. The IP Base software includes advanced QoS, rate-limiting, ACLs, and basic routing and IPv6 functionality.
The IP Services software provides a richer set of enterprise-class features, including advanced hardware-based IP unicast and IP Multicast routing as well as policy-based routing (PBR)¨¨¨.
So, I need to upgrade to IP Services software.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide