08-26-2009 09:21 AM - edited 03-04-2019 05:51 AM
I are planning to make a wireless network for 4000 PDAs (802.11g) in a trade fair has dimension of 65m (width) x 120m (long) x 11m (height). Accesspoints is placed near the ceiling (10m heigth).
I have search on the internet, but there are no way to do this (in my opinion).
I am a newbie in wireless.
08-26-2009 10:47 AM
Why doy think there is no way? Split clients over channels 3 or 4 channels and you should have no issue.
08-26-2009 02:30 PM
I agree with Paolo. If there's a will, there's a way.
Firstly, how many AP's are you planning to deploy?
Are you using Cisco's Wireless APs, WLC and WCS?
To manage that large amount of APs, a Wireless LAN Controller and Wireless Controller System combination will provide network managers a true plug-n-play wireless experience. Just do the configure ONCE.
Hope this helps.
08-26-2009 06:48 PM
I could see where it might be very difficult, especially if the PDAs need to roam within the trade fair and limited to 802.11g. Perhaps somthing like Xirrus's Wi-Fi Array might help.
You might repost the question in the "Wireless - Mobility" forum.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide