08-26-2009 10:39 PM - edited 03-17-2019 09:48 PM
hi all,
There is implementation of Gatekeeper in distributed (CME only) model for CAC. Is it possible to define in the gateway to allow certain number of incoming/outgoing call (if gatekeeper is not implemented).
Regards
Naresh
08-27-2009 08:38 PM
Hi Naresh,
CME can do a limited amount of CAC itself without a gatekeeper, either by limiting the number of simultaneous calls associated with each dial peer or by using RSVP.
But, per dial peer call counting doesn't work well if you're using more than one dial peer per WAN link, and RSVP requires end to end support within your network.
Hope it helps, if it does please rate.
Best regards,
- Adrián.
08-28-2009 06:37 AM
There are a number of call treatment options.
You can do it on CPU utilization, a certain amount of calls over an interface, and many others.
There's more information on the call treatment and call threshold information here:
http://www.cisco.com/en/US/docs/ios/12_2t/12_2t11/feature/guide/ftcac58.html#wp1069155
As well, the 'call treatment' and 'call threshold' command reference is helpful.
hth,
nick
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: