AP1522 - cannot PING

Unanswered Question
Aug 28th, 2009
User Badges:

Hi,


AP1522 successfully assigned IP address from DHCP server but cannot PING.


I configured DHCP server in 3560 switch,

!

ip dhcp pool AP_test

network 10.50.221.80 255.255.255.240

default-router 10.50.221.81

option 60 ascii "Cisco AP c1520"

option 43 hex f104.0a32.dd52

!

(**I have one 4402 WLC with IP address 10.50.221.82 which maps to 0a32.dd52)

!

Staging1_SW1#sh ip dhcp binding

IP address Client-ID/ Lease expiration Type

Hardware address

10.50.221.88 0100.2450.35dc.00 May 12 1993 07:00 AM Automatic

!

Staging1_SW1#sh cdp ne f0/17 detail

-------------------------

Device ID: MeshAP

Entry address(es):

IP address: 10.50.221.88

Platform: cisco AIR-LAP1522AG-N-K9 , Capabilities: Trans-Bridge

Interface: FastEthernet0/17, Port ID (outgoing port): GigabitEthernet0

Holdtime : 166 sec


Version :

Cisco IOS Software, C1520 Software (C1520-K9W8-M), Version 12.4(18a)JA, RELEASE

SOFTWARE (fc4)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2008 by Cisco Systems, Inc.

Compiled Fri 21-Nov-08 09:33 by prod_rel_team


advertisement version: 2

Duplex: full

Power drawn: 10.200 Watts

Power request id: 46913, Power management id: 1

Power request levels are:0 0 0 0 0

Management address(es):

!


Advise please,

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
ggittins Sun, 09/13/2009 - 01:16
User Badges:

where did you add the address? into WLC

what version are you running?

i have the same scenario that the 1522 gets an ip address but can ping it from the switch?

Actions

This Discussion