SNMP Object navigator- Ios Version

Unanswered Question
Aug 31st, 2009

I m getting the error , not supported for the following Show version in Snmp Object Navigator in this link,

http://tools.cisco.com/Support/SNMP/do/MIBSupport.do?local=en&step=3

sh version

Cisco IOS Software, c7600s3223_rp Software (c7600s3223_rp-IPSERVICES-M), Version

12.2(33)SRB1, RELEASE SOFTWARE (fc3)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Fri 01-Jun-07 07:53 by prod_rel_team

ROM: System Bootstrap, Version 12.2(17r)SX3, RELEASE SOFTWARE (fc1)

GJ-AHM-BDH-AR01 uptime is 31 weeks, 4 days, 23 hours, 42 minutes

Uptime for this control processor is 31 weeks, 4 days, 23 hours, 51 minutes

Time since switched to active is 31 weeks, 4 days, 23 hours, 44

minutes

System returned to ROM by power-on (SP by power-on)

System image file is "bootdisk:c7600s3223-ipservices-mz.122-33.SRB1.bin"

Last reload type: Normal Reload

cisco CISCO7609 (R7000) processor (revision 1.2) with 458752K/65536K bytes of me

mory.

Processor board ID FOX11330J4M

R7000 CPU at 300Mhz, Implementation 0x27, Rev 3.3, 256KB L2, 1024KB L3 Cache

Last reset from power-on

2 SIP-200 controllers (32 E1)(2 POS).

1 Virtual Ethernet interface

48 FastEthernet interfaces

18 Gigabit Ethernet interfaces

32 Serial interfaces

32 Channelized E1 ports

2 Packet over SONET interfaces

1915K bytes of non-volatile configuration memory.

65536K bytes of Flash internal SIMM (Sector size 512K).

Configuration register is 0x2102

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
Loading.

Actions

This Discussion